HTS Code Lookup – Find Tariff Codes by Product or Number
Search the Harmonized Tariff Schedule by entering a product name or HTS code to get duty rates, descriptions, and classification details.
Open main menu
Railway or tramway track construction material of iron or steel, the following : rails, check-rails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers "cross-ties", fish-plates, chairs, chair wedges, sole plates "base plates", rail clips, bedplates, ties and other material specialised for jointing or fixing rails
Sleepers "cross-ties", check-rails, rack rails, chairs, chair wedges, rail clips, bedplates and ties and other specialised material for the jointing or fixing of railway or tramway track, of iron or steel (excluding rails, switch blades, crossing frogs, point rods and other crossing pieces, and fish-plates and sole plates)
Having an outside diameter exceeding <il>114.3 mm</il> but not exceeding <il>406.4 mm</il>
Having an outside diameter exceeding <il>114.3 mm</il> but less than <il>215.9 mm</il>
Having an outside diameter exceeding <il>114.3 mm</il> but not exceeding <il>406.4 mm</il>
Having an outside diameter exceeding <il>114.3 mm</il> but less than <il>215.9 mm</il>
Having an outside diameter of <il>215.9 mm</il> or more but not exceeding <il>406.4 mm</il>
Having an outside diameter exceeding <il>114.3 mm</il> but less than <il>215.9 mm</il>
Having an outside diameter of <il>215.9 mm</il> or more but not exceeding <il>406.4 mm</il>
Having an outside diameter exceeding <il>114.3 mm</il> but less than <il>215.9 mm</il>
Having an outside diameter of <il>215.9 mm</il> or more but not exceeding <il>406.4 mm</il>
Tubes, pipes and hollow profiles, seamless, of circular cross-section, of iron or non-alloy steel, cold-drawn or cold-rolled "cold-reduced" (excluding cast iron products and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used for drilling for oil or gas)
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
Having an outside diameter of <il>190.5 mm</il> or more but not exceeding <il>285.8 mm</il>
Having a wall thickness of <il>6.4 mm</il> or more but not exceeding <il>12.7 mm</il>
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters
Having an outside diameter of <il>38.1 mm</il> or more but not exceeding <il>114.3 mm</il>
Having an outside diameter exceeding <il>114.3 mm</il> but less than <il>190.5 mm</il>
Having an outside diameter of <il>190.5 mm</il> or more but not exceeding <il>285.8 mm</il>
Having an outside diameter exceeding <il>285.8 mm</il> but not exceeding <il>406.4 mm</il>
Having a wall thickness of <il>6.4 mm</il> or more but not exceeding <il>12.7 mm</il>
With an external diameter exceeding <il>406.4 mm</il> but not exceeding <il>609.6 mm</il>
With an external diameter exceeding <il>406.4 mm</il> but not exceeding <il>609.6 mm</il>
With an external diameter exceeding <il>406.4 mm</il> but not exceeding <il>609.6 mm</il>
Tapered pipes and tubes of steel principally used as parts of illuminating articles
Tubes, pipes and hollow profiles, welded, of circular cross-section, of iron or non-alloy steel (excluding products having internal and external circular cross-sections and an external diameter of 406,4 mm, or line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn
Other, cold-rolled (cold-reduced) with a wall thickness not exceeding <il>2.54 mm</il>
Internally coated or lined with a non-electrically insulating material, suitable for use as electrical conduit
Tubes, pipes and hollow profiles, welded, of circular cross-section, of stainless steel (excluding products having internal and external circular cross-sections and an external diameter of 406,4 mm, and products of a kind used for oil or gas pipelines or of a kind used in drilling for oil or gas)
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn
Containing more than 0.5 percent but less than <il>24 percent</il> by weight of nickel
Tubes, pipes and hollow profiles, welded, of circular cross-section, of alloy steel other than stainless (excluding tubes and pipes having internal and external circular cross-sections and an external diameter of 406,4 mm, and line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas)
Tapered pipes and tubes of steel principally used as parts of illuminating articles
Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold-drawn
With an outside diameter exceeding <il>114.3 mm</il> but not exceeding <il>406.4 mm</il>
Tubes, pipes and hollow profiles, welded, of non-circular cross-section, of iron or steel (excluding tubes and pipes having internal and external circular cross-sections and an external diameter of 406,4 mm, line pipe of a kind used for oil or gas pipelines or casing and tubing of a kind used in drilling for oil or gas, and tubes and pipes and hollow profiles of square or rectangular cross-section)
Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excluding prefabricated buildings of heading 9406)
Reservoirs, tanks, vats and similar containers, of iron or steel, for any material "other than compressed or liquefied gas", of a capacity of 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excluding containers specifically constructed or equipped for one or more types of transport)
Reservoirs, tanks, vats and similar containers, of iron or steel, for any material other than compressed or liquefied gas", of a capacity of 300 l, not fitted with mechanical or thermal equipment, whether or not lined or heat-insulated (excluding containers specifically constructed or equipped for one or more types of transport)"
Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding <il>300 liters</il>, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter.
Containers, of circular cross section, of a volume capacity between <il>11.4 liters</il> and <il>26.6 liters</il>, of a kind used for the conveyance of goods
Tanks, casks, drums, cans, boxes and similar containers, of iron or steel, for any material, of a capacity of 50 l, n.e.s. (excluding containers for compressed or liquefied gas, or containers fitted with mechanical or thermal equipment, and cans which are to be closed by soldering or crimping)
Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter
Refillable stainless steel kegs, whether or not pressurized, of a kind described in statistical note 1 to this chapter
Seamless steel containers not overwrapped, marked dot 3a, 3ax, 3aa, 3aax, 3b, 3e, 3ht, 3t or dot-e followed by a specific exemption number
Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by <il>8.5</il>
Other, stranded wire having a lay or twist of not more than 1 revolution for a length equal to the strand diameter multiplied by 8.5
Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel
With meshes not finer than <il>12 wires</il> to the lineal centimeter in warp or filling
With meshes finer than 12 but not finer than <il>36 wires</il> to the lineal centimeter in warp or filling
With meshes not finer than <il>12 wires</il> to the lineal centimeter in warp or filling
With meshes finer than 12 but not finer than <il>36 wires</il> to the lineal centimeter in warp or filling
Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of <il>3 mm</il> or more and having a mesh size of <il>100 cm<sup>2</sup></il> or more
Wire fencing plated or coated with zinc, whether or not covered with plastic material
Welded wire stucco netting, furred, not reinforced with supplemental horizontal wire
Chain of iron or steel (excluding articulated link chain, skid chain, stud-link chain, welded link chain and parts thereof; watch chains, necklace chains and the like, cutting and saw chain, skid chain, scraper chain for conveyors, toothed chain for textile machinery and the like, safety devices with chains for securing doors, and measuring chains)
Collated roofing nails with a length of <il>20.6 mm</il> to <il>46.1 mm</il>, a head diameter of <il>8.3 mm</il> to <il>10.6 mm</il>, a shank diameter of <il>2.5 mm</il> to <il>3.2 mm</il>, whether or not galvanized
With a length of less than <il>25.4 mm</il> and with a diameter of less than <il>1.65 mm</il>
Machine screws <il>9.5 mm</il> or more in length and <il>3.2 mm</il> or more in diameter (not including cap screws)
Leaf springs having individual leaves with a thickness of <il>1.6 mm</il> or more and leaves therefor
Leaf springs having individual leaves with a thickness of <il>1.6 mm</il> or more and leaves therefor
Helical springs, of wire having a cross-sectional dimension of <il>5.1 mm</il> or more but less than <il>12.7 mm</il>
Springs and leaves for springs, of iron or steel, incl. flat spiral springs (excluding helical springs, spiral springs, leaf-springs and leaves therefor, clock and watch springs, spring washers and other lock washers and shock absorbers and torque rod or torsion bar springs of section 17)
Stoves, ranges, grates, cookers, incl. those with subsidiary boilers for central heating, barbecues, braziers, gas rings, plate warmers and similar non-electric domestic appliances, and parts thereof of iron or steel (excluding boilers and radiators for central heating, geysers and hot water cylinders)
Stoves, heaters, grates, fires, wash boilers, braziers and similar appliances, of iron or steel, for gas fuel or for both gas and other fuels (excluding cooking appliances, whether or not with oven, separate ovens, plate warmers, central heating boilers, geysers and hot water cylinders and large cooking appliances)
Stoves, heaters, grates, fires, wash boilers, braziers and similar domestic appliances, of iron or steel, for solid fuel or other non-electricsource of energy (excluding liquid or gaseous fuel, and cooking appliances, whether or not with oven, separate ovens, plate warmers, central heating boilers, hot water cylinders and large cooking appliances)
Door assemblies, incorporating more than one of the following: inner panel, outer panel, window, insulation
Radiators for central heating, non-electrically heated, and parts thereof, of iron or steel; air heaters and hot-air distributors, incl. distributors which can also distribute fresh or conditioned air, non-electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel
Hot air distributors, not electrically heated, incorporating a motor-driven fan or blower
Table, kitchen or other household articles, and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel (excluding cans, boxes and similar containers of heading 7310; waste baskets; shovels, corkscrews and other articles of the nature of a work implement; articles of cutlery, spoons, ladles, forks etc. of heading 8211 to 8215; ornamental articles; sanitary ware)
Iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like
Table, kitchen or other household articles, and parts thereof, of cast iron, not enamelled (excluding cans, boxes and similar containers of heading 7310; waste baskets; shovels, corkscrews and other articles of the nature of a work implement; articles of cutlery, spoons, ladles, forks etc. of heading 8211 to 8215; ornamental articles; sanitary ware)
Table, kitchen or other household articles, and parts thereof, of cast iron, enamelled (excluding cans, boxes and similar containers of heading 7310; waste baskets; shovels, corkscrews and other articles of the nature of a work implement; articles of cutlery, spoons, ladles, forks etc. of heading 8211 to 8215; ornamental articles; sanitary ware)
Table, kitchen or other household articles, and parts thereof, of stainless steel (excluding cans, boxes and similar containers of heading 7310; waste baskets; shovels, corkscrews and other articles of the nature of a work implement; articles of cutlery, spoons, ladles, forks etc. of heading 8211 to 8215; ornamental articles; sanitary ware)
Table, kitchen or other household articles, and parts thereof, of iron other than cast iron or steel other than stainless, enamelled (excluding cans, boxes and similar containers of heading 7310; waste baskets; shovels, corkscrews and other articles of the nature of a work implement; articles of cutlery, spoons, ladles, forks etc. of heading 8211 to 8215; ornamental articles; sanitary ware; articles for table use)
Table, kitchen or other household articles, and parts thereof, of iron other than cast iron or steel other than stainless (excluding enamelled articles; cans, boxes and similar containers of heading 7310; waste baskets; shovels and other articles of the nature of a work implement; cutlery, spoons, ladles etc. of heading 8211 to 8215; ornamental articles; sanitary ware)
Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length
Containers of a kind normally carried on the person, in the pocket or in the handbag
Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material
Fence posts, studded with corrugations, knobs, studs, notches or similar protrusions, with or without anchor plates