HTS Code Lookup
Find Tariff Codes by Product or Number
Search the Harmonized Tariff Schedule by entering a product name or HTS code to get duty rates, descriptions, and classification details.
Open main menu
Nonalloy pig iron in pigs, blocks or other primary forms containing by weight 0.5 percent or less of phosphorus
Nonalloy pig iron in pigs, blocks or other primary forms containing by weight more than 0.5 percent of phosphorus
Ferromanganese containing by weight more than 2 percent of carbon, specifically containing by weight more than 2 percent but not more than 4 percent of carbon
Ferromanganese containing by weight more than 2 percent of carbon, specifically containing by weight more than 4 percent of carbon
Ferromanganese containing by weight 2 percent or less of carbon, specifically containing by weight not more than 1 percent of carbon
Ferromanganese containing by weight 2 percent or less of carbon, specifically containing by weight more than 1 percent but not more than 2 percent of carbon
Ferrosilicon containing by weight more than 55 percent of silicon, specifically more than 55 percent but not more than 80 percent of silicon and containing by weight more than 3 percent of calcium
Ferrosilicon containing by weight more than 55 percent of silicon, specifically more than 55 percent but not more than 80 percent of silicon and containing by weight 3 percent or less of calcium
Ferrosilicon containing by weight more than 80 percent but not more than 90 percent of silicon
Ferrosilicon containing by weight 55 percent or less of silicon, specifically containing by weight over 2 percent of magnesium
Ferrosilicon containing by weight 55 percent or less of silicon, containing 2 percent or less of magnesium
Ferrochromium containing by weight 4 percent or less of carbon, specifically containing by weight more than 3 percent of carbon
Ferrochromium containing by weight 3 percent or less of carbon, specifically containing by weight more than 0.5 percent of carbon
Ferroniobium containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon
Ferroniobium not meeting the specific low-phosphorus, low-sulfur, or low-silicon thresholds
Ferrous products obtained by direct reduction of iron ore in lumps, pellets or similar forms
Spongy ferrous products and iron having a minimum purity by weight of 99.94 percent in lumps, pellets or similar forms
Waste and scrap of cast iron, including cupola cast isri 252, charging box cast isri 253, heavy breakable cast isri 254, hammer blocks isri 255, burnt iron isri 256, mixed cast isri 257, stove plate isri 258, clean auto cast isri 259, 262, 263, motor blocks isri 260, drop broken machinery cast isri 261, malleable isri 264, ingot molds and stools isri 265, 266, and railroad ferrous scrap consisting of cast iron number 1, 2, 3, 4, brake shoes and number 1 wheels
Ferrous waste and scrap consisting of turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
Ferrous waste and scrap consisting of turnings, shavings, chips, and trimmings, specifically number 1 bundles including number 1 busheling isri 207, new black sheet clippings isri 207a, number 1 bundles isri 208, electric furnace bundles isri 235, silicon-bearing steel busheling and clippings isri 239, 240, 250, number 1 railroad ferrous sheet scrap and car clips
Ferrous waste and scrap consisting of turnings, shavings, chips, and trimmings, specifically number 2 bundles including number 2 bundles isri 209, number 3 bundles isri 214, incinerator bundles isri 215, terne plate bundles isri 216, and auto slabs isri 224 and 225
Ferrous waste and scrap consisting of turnings, shavings, chips, and trimmings, specifically borings, shovelings and turnings, including machine shop turnings isri 219-223, briquetted iron borings isri 226, briquetted steel turnings isri 227, alloy free turnings isri 245-247, heavy turnings isri 251, chemical borings isri 267 and 271, and malleable borings isri 270
Ferrous waste and scrap, turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, not of cast iron, alloy steel, or tinned iron, and not including no. 1 or no. 2 bundles or specific borings
Waste and scrap of iron or steel (excluding slag, scale and other waste of the production of iron and steel; radioactive waste and scrap; fragments of pigs, blocks or other primary forms of pig iron or spiegeleisen; waste and scrap of cast iron, alloy steel or tinned iron or steel; turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings; waste and scrap of primary cells, primary batteries and electric accumulators)
Ferrous waste and scrap, not elsewhere specified, of number 1 heavy melting steel including isri numbers 200, 201 and 202, bundled number 1 steel isri 217, cast steel isri 233, springs and crankshafts isri 244, ship scrap and railroad ferrous scrap
Ferrous waste and scrap, not elsewhere specified, of number 2 heavy melting steel including isri numbers 203, 204, 205 and 206, bundled number 2 steel isri 218, foundry steel isri 242 and 243, and hard steel cut 76 centimeters and under isri 248
Ferrous waste and scrap, not elsewhere specified, consisting of cut plate and structural steel including billet, bloom and forge crops isri 229, bar crops and punchings isri 230 and 234, plate and structural isri 231, 232, 236, 237 and 238, and chargeable ingots or slab crops isri 241 and 249
Ferrous waste and scrap, not elsewhere specified, consisting of shredded scrap including shredded clippings isri 212 and shredded automobile scrap isri 210 and 211
Ferrous waste and scrap, not of cast iron, alloy steel, or tinned iron, and not classified as heavy melting, cut plate and structural, or shredded scrap
Semifinished products of iron or nonalloy steel containing by weight less than 0.25 percent of carbon, of rectangular or square cross section, the width measuring less than twice the thickness
Semifinished products of iron or nonalloy steel containing by weight less than 0.25 percent of carbon, of rectangular cross section where the width measures at least twice the thickness
Semifinished products of iron or nonalloy steel, rectangular cross section where the width is at least twice the thickness, containing less than 0.25 percent carbon, width measuring less than four times the thickness
Semifinished products of iron or nonalloy steel, rectangular cross section where the width is at least twice the thickness, containing less than 0.25 percent carbon, width measuring at least four times the thickness
Semifinished products of iron or nonalloy steel containing by weight less than 0.25 percent of carbon, of cross sections other than rectangular or square
Semifinished products of iron or nonalloy steel, containing by weight less than 0.25 percent carbon, of circular cross section
Semifinished products of iron or nonalloy steel, containing by weight less than 0.25 percent carbon, not of rectangular or circular cross section
Semifinished products of iron or nonalloy steel containing by weight 0.25 percent or more of carbon
Semifinished products of iron or nonalloy steel, containing by weight 0.25 percent or more carbon, of rectangular or square cross section with a width measuring less than four times the thickness
Semifinished products of iron or nonalloy steel, containing by weight 0.25 percent or more carbon, of rectangular or square cross section with a width measuring at least four times the thickness
Semifinished products of iron or nonalloy steel, containing by weight 0.25 percent or more carbon, of circular cross section
Semifinished products of iron or nonalloy steel, containing by weight 0.25 percent or more carbon, not of rectangular or circular cross section
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, in coils, not further worked than hot-rolled, with patterns in relief, pickled
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, in coils, not further worked than hot-rolled, with patterns in relief, not pickled, of a thickness of 4.75 millimeters or more
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, in coils, not further worked than hot-rolled, with patterns in relief, not pickled, of a thickness of less than 4.75 millimeters
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, in coils, not further worked than hot-rolled, pickled, of a thickness of 4.75 millimeters or more, of high-strength steel
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, in coils, not further worked than hot-rolled, pickled, of a thickness of 4.75 millimeters or more, not of high-strength steel
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, in coils, not further worked than hot-rolled, pickled, of a thickness of 3 millimeters or more but less than 4.75 millimeters
Flat-rolled products of iron or nonalloy steel, 600 millimeters or more wide, hot-rolled, pickled, thickness 3 to 4.75 millimeters, of high-strength steel
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, pickled, of a thickness of 3 mm or more but less than 4.75 mm, not of high-strength steel
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, in coils, not further worked than hot-rolled, pickled, of a thickness of less than 3 millimeters
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, pickled, of a thickness of less than 3 mm, of high-strength steel other than "advanced" or "ultra" varieties
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, pickled, of a thickness of less than 3 mm, not of high-strength steel
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, in coils, not further worked than hot-rolled, not pickled, of a thickness exceeding 10 millimeters
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, of a thickness exceeding 10 mm, of high-strength steel
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, of a thickness exceeding 10 mm, not of high-strength steel
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, in coils, not further worked than hot-rolled, not pickled, of a thickness of 4.75 millimeters or more but not exceeding 10 millimeters
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, of a thickness of 4.75 mm or more but not exceeding 10 mm, of high-strength steel
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, of a thickness of 4.75 mm or more but not exceeding 10 mm, not of high-strength steel
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, in coils, not further worked than hot-rolled, not pickled, of a thickness of 3 millimeters or more but less than 4.75 millimeters
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, of a thickness of 3 mm or more but less than 4.75 mm, of high-strength steel
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, of a thickness of 3 mm or more but less than 4.75 mm, with untrimmed edges
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, of a thickness of 3 mm or more but less than 4.75 mm, with trimmed edges
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, in coils, not further worked than hot-rolled, not pickled, of a thickness of less than 3 millimeters
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, of a thickness of less than 3 mm, of high-strength steel other than "advanced" or "ultra" varieties
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, of a thickness of less than 3 mm, with untrimmed edges
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than hot-rolled, of a thickness of less than 3 mm, with trimmed edges
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, not in coils, not further worked than hot-rolled, with patterns in relief, of a thickness of 4.75 millimeters or more
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, not in coils, not further worked than hot-rolled, with patterns in relief, of a thickness exceeding 10 mm
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, not in coils, not further worked than hot-rolled, with patterns in relief, of a thickness of 4.75 mm or more but not exceeding 10 mm
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, not in coils, not further worked than hot-rolled, with patterns in relief, of a thickness of less than 4.75 millimeters
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, not in coils, not further worked than hot-rolled, with patterns in relief, of a thickness less than 3 mm
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, not in coils, not further worked than hot-rolled, with patterns in relief, of a thickness of 3 mm or more but less than 4.75 mm
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, not in coils, not further worked than hot-rolled, not possessing patterns in relief, of a thickness exceeding 10 millimeters
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness exceeding 10 mm, consisting of universal mill plate
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness exceeding 10 mm, of high-strength steel
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, not in coils, not further worked than hot-rolled, of a thickness exceeding 10 mm, not of high-strength steel or universal mill plate
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, not in coils, not further worked than hot-rolled, not possessing patterns in relief, of a thickness of 4.75 millimeters or more but not exceeding 10 millimeters
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, not in coils, not further worked than hot-rolled, not possessing patterns in relief, of a thickness of 3 millimeters or more but less than 4.75 millimeters
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, not in coils, not further worked than hot-rolled, not possessing patterns in relief, of a thickness of less than 3 millimeters
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, hot-rolled, not clad, plated or coated, further worked than hot-rolled
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, cold-rolled (cold-reduced), not clad, plated or coated, in coils, not further worked than cold-rolled, of a thickness of 3 millimeters or more
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, cold-rolled, not clad, plated or coated, in coils, not further worked than cold-rolled, of a thickness exceeding 1 millimeter but less than 3 millimeters
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness exceeding 1 mm but less than 3 mm, of annealed high-strength steel
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness exceeding 1 mm but less than 3 mm, of high-strength steel not annealed
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness exceeding 1 mm but less than 3 mm, annealed
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness exceeding 1 mm but less than 3 mm, not annealed
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, cold-rolled, not clad, plated or coated, in coils, not further worked than cold-rolled, of a thickness of 0.5 millimeters or more but not exceeding 1 millimeter
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness of 0.5 mm or more but not exceeding 1 mm, of annealed high-strength steel
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness of 0.5 mm or more but not exceeding 1 mm, of high-strength steel not annealed
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness of 0.5 mm or more but not exceeding 1 mm, annealed
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness of 0.5 mm or more but not exceeding 1 mm, not annealed
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, cold-rolled, not clad, plated or coated, in coils, not further worked than cold-rolled, of a thickness of less than 0.5 millimeters, of high-strength steel
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness of less than 0.5 mm, of annealed high-strength steel
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness of less than 0.5 mm, of high-strength steel not annealed
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, cold-rolled, not clad, plated or coated, in coils, not further worked than cold-rolled, of a thickness of less than 0.5 millimeters, not of high-strength steel, of a thickness less than 0.361 millimeters (blackplate)
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness of less than 0.361 mm (blackplate), annealed
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness of less than 0.361 mm (blackplate), not annealed
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, cold-rolled, not clad, plated or coated, in coils, not further worked than cold-rolled, of a thickness of less than 0.5 millimeters, not of high-strength steel, of a thickness of 0.361 millimeters or more
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness of 0.361 mm or more but less than 0.5 mm, annealed
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, in coils, not further worked than cold-rolled, of a thickness of 0.361 mm or more but less than 0.5 mm, not annealed
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, cold-rolled, not clad, plated or coated, not in coils, not further worked than cold-rolled, of a thickness of 3 millimeters or more
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, cold-rolled, not clad, plated or coated, not in coils, not further worked than cold-rolled, of a thickness exceeding 1 millimeter but less than 3 millimeters
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, cold-rolled, not clad, plated or coated, not in coils, not further worked than cold-rolled, of a thickness of 0.5 millimeters or more but not exceeding 1 millimeter
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, cold-rolled, not clad, plated or coated, not in coils, not further worked than cold-rolled, of a thickness of less than 0.5 millimeters
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, cold-rolled, not clad, plated or coated, further worked than cold-rolled
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, plated or coated with tin, of a thickness of 0.5 millimeters or more
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, plated or coated with tin, of a thickness of less than 0.5 millimeters
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, plated or coated with lead, including terne-plate
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, electrolytically plated or coated with zinc
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, electrolytically plated or coated with zinc, of high-strength steel
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, electrolytically plated or coated with zinc, not of high-strength steel
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, otherwise plated or coated with zinc, corrugated
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, otherwise plated or coated with zinc, not corrugated
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, otherwise plated or coated with zinc, not corrugated, of high-strength steel other than "advanced" or "ultra" varieties
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, otherwise plated or coated with zinc, not corrugated, of a thickness of 0.4 mm or more
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, otherwise plated or coated with zinc, not corrugated, of a thickness of less than 0.4 mm
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, plated or coated with chromium oxides or with chromium and chromium oxides
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, plated or coated with aluminum, specifically aluminum-zinc alloys
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, plated or coated with aluminum other than aluminum-zinc alloys
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, painted, varnished or coated with plastics, not coated or plated with metal and not clad
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, painted, varnished or coated with plastics, coated or plated with metal or clad
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, painted, varnished or coated with plastics, electrolytically coated or plated with zinc
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, painted, varnished or coated with plastics, otherwise coated or plated with zinc (not electrolytically)
Flat-rolled products of iron or nonalloy steel, width 600 mm or more, painted, varnished or coated with plastics, plated or coated with metal other than zinc or clad
Flat-rolled products of iron or non-alloy steel, of a width of = 600 mm, hot-rolled or cold-rolled "cold-reduced", clad, plated or coated (excluding tinned, plated or coated with lead, zinc, chromium oxides, chromium and chromium oxides, or aluminium, painted, varnished or coated with plastics)
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, clad with other iron or steel
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, not clad, specifically electrolytically coated or plated with base metal
Flat-rolled products of iron or nonalloy steel, width of 600 millimeters or more, clad, plated or coated, not clad, specifically otherwise coated or plated than electrolytically with base metal
Flat-rolled products of iron or nonalloy steel, width of less than 600 millimeters, not clad, plated or coated, not further worked than hot-rolled, universal mill plate
Flat-rolled products of iron or nonalloy steel, width of less than 600 millimeters, not clad, plated or coated, not further worked than hot-rolled, not universal mill plate, of a thickness of 4.75 millimeters or more
Flat-rolled products of iron or nonalloy steel, width less than 600 mm, not further worked than hot-rolled, of a thickness of 4.75 mm or more, of high-strength steel
Flat-rolled products of iron or nonalloy steel, width less than 600 mm, not further worked than hot-rolled, of a thickness of 4.75 mm or more, not in coils
Flat-rolled products of iron or nonalloy steel, width less than 600 mm, not further worked than hot-rolled, of a thickness of 4.75 mm or more, in coils
Flat-rolled products of iron or nonalloy steel, width of less than 300 millimeters, not clad, plated or coated, not further worked than hot-rolled, of a thickness less than 4.75 millimeters, of high-strength steel
Flat-rolled products of iron or nonalloy steel, width of less than 300 millimeters, not clad, plated or coated, not further worked than hot-rolled, of a thickness exceeding 1.25 millimeters but less than 4.75 millimeters, not of high-strength steel
Flat-rolled products of iron or nonalloy steel, width of less than 300 millimeters, not clad, plated or coated, not further worked than hot-rolled, of a thickness not exceeding 1.25 millimeters, not of high-strength steel
Flat-rolled products of iron or nonalloy steel, width of 300 millimeters or more but less than 600 millimeters, not clad, plated or coated, not further worked than hot-rolled, of a thickness less than 4.75 millimeters, of high-strength steel
Flat-rolled products of iron or nonalloy steel, width of 300 millimeters or more but less than 600 millimeters, not clad, plated or coated, not further worked than hot-rolled, of a thickness less than 4.75 millimeters, not of high-strength steel, pickled
Flat-rolled products of iron or nonalloy steel, width of 300 millimeters or more but less than 600 millimeters, not clad, plated or coated, not further worked than hot-rolled, of a thickness less than 4.75 millimeters, not of high-strength steel, not pickled
Flat-rolled products of iron or nonalloy steel, width less than 600 mm, not further worked than hot-rolled, of a thickness of less than 4.75 mm, in coils with untrimmed edges
Flat-rolled products of iron or nonalloy steel, width less than 600 mm, not further worked than hot-rolled, of a thickness of less than 4.75 mm, in coils with trimmed edges
Flat-rolled products of iron or nonalloy steel, width less than 600 mm, not further worked than hot-rolled, of a thickness of less than 4.75 mm, not in coils
Flat-rolled products of iron or nonalloy steel, width of less than 300 millimeters, not clad, plated or coated, cold-rolled, less than 0.25 percent carbon, of high-strength steel, of a thickness exceeding 1.25 millimeters
Flat-rolled products of iron or nonalloy steel, width of less than 300 millimeters, not clad, plated or coated, cold-rolled, less than 0.25 percent carbon, not of high-strength steel, of a thickness exceeding 1.25 millimeters
Flat-rolled products of iron or nonalloy steel, width of less than 300 millimeters, not clad, plated or coated, cold-rolled, less than 0.25 percent carbon, thickness exceeding 0.25 millimeters but not exceeding 1.25 millimeters
Flat-rolled products of iron or nonalloy steel, width of less than 300 millimeters, not clad, plated or coated, cold-rolled, less than 0.25 percent carbon, thickness not exceeding 0.25 millimeters
Flat-rolled products of iron or nonalloy steel, width of 300 millimeters or more but less than 600 millimeters, not clad, plated or coated, cold-rolled, containing less than 0.25 percent carbon
Flat-rolled products of iron or nonalloy steel, width less than 600 mm, not further worked than cold-rolled, containing by weight less than 0.25 percent carbon, of a thickness exceeding 1.25 mm
Flat-rolled products of iron or nonalloy steel, width less than 600 mm, not further worked than cold-rolled, containing by weight less than 0.25 percent carbon, of a thickness exceeding 0.25 mm but not exceeding 1.25 mm
Flat-rolled products of iron or nonalloy steel, width less than 600 mm, not further worked than cold-rolled, containing by weight less than 0.25 percent carbon, of a thickness not exceeding 0.25 mm
Flat-rolled products of iron or nonalloy steel, width of less than 300 millimeters, not clad, plated or coated, cold-rolled, 0.25 percent or more carbon, of a thickness exceeding 0.25 millimeters
Flat-rolled products of iron or nonalloy steel, width less than 300 mm, not further worked than cold-rolled, containing by weight 0.25 percent or more carbon, of a thickness exceeding 0.25 mm, in coils with a width less than 51 mm
Flat-rolled products of iron or nonalloy steel, width less than 300 mm, not further worked than cold-rolled, containing by weight 0.25 percent or more carbon, of a thickness exceeding 0.25 mm, not in coils or with width 51 mm or more
Flat-rolled products of iron or nonalloy steel, width of less than 300 millimeters, not clad, plated or coated, cold-rolled, 0.25 percent or more carbon, of a thickness not exceeding 0.25 millimeters
Flat-rolled products of iron or nonalloy steel, width of 300 millimeters or more but less than 600 millimeters, not clad, plated or coated, cold-rolled, containing 0.25 percent or more carbon
Flat-rolled products of iron or nonalloy steel, width 300 mm or more but less than 600 mm, not further worked than cold-rolled, containing by weight 0.25 percent or more carbon, of a thickness exceeding 1.25 mm
Flat-rolled products of iron or nonalloy steel, width 300 mm or more but less than 600 mm, not further worked than cold-rolled, containing by weight 0.25 percent or more carbon, of a thickness not exceeding 1.25 mm
Flat-rolled products of iron or nonalloy steel, width of less than 600 millimeters, not clad, plated or coated, further worked than hot-rolled or cold-rolled
Flat-rolled products of iron or nonalloy steel, width of less than 600 millimeters, clad, plated or coated, plated or coated with tin
Flat-rolled products of iron or nonalloy steel, width of less than 600 millimeters, clad, plated or coated, electrolytically plated or coated with zinc
Flat-rolled products of iron or nonalloy steel, width of less than 300 millimeters, clad, plated or coated, otherwise plated or coated with zinc, of a thickness of 0.25 millimeters or more
Flat-rolled products of iron or nonalloy steel, width less than 300 mm, otherwise plated or coated with zinc, of a thickness of 0.25 mm or more, in coils with a width less than 51 mm
Flat-rolled products of iron or nonalloy steel, width less than 300 mm, otherwise plated or coated with zinc, of a thickness of 0.25 mm or more, not in coils or with width 51 mm or more
Flat-rolled products of iron or nonalloy steel, width of less than 300 millimeters, clad, plated or coated, otherwise plated or coated with zinc, of a thickness less than 0.25 millimeters
Flat-rolled products of iron or nonalloy steel, width of 300 millimeters or more but less than 600 millimeters, clad, plated or coated, otherwise plated or coated with zinc
Flat-rolled products of iron or nonalloy steel, width of less than 300 millimeters, clad, plated or coated, painted, varnished or coated with plastics
Flat-rolled products of iron or nonalloy steel, width of 300 millimeters or more but less than 600 millimeters, clad, plated or coated, painted, varnished or coated with plastics
Flat-rolled products of iron or nonalloy steel, width of less than 600 millimeters, clad, plated or coated, otherwise plated or coated with base metals
Flat-rolled products of iron or nonalloy steel, width of less than 600 millimeters, clad
Bars and rods of iron or nonalloy steel, hot-rolled, in irregularly wound coils, containing indentations, ribs, grooves or other deformations (concrete reinforcing)
Bars and rods of iron or nonalloy steel, hot-rolled, in irregularly wound coils, of free-cutting steel
Bars and rods, hot-rolled, in irregularly wound coils, of free-cutting iron or nonalloy steel, containing by weight 0.1 percent or more lead
Bars and rods, hot-rolled, in irregularly wound coils, of free-cutting iron or nonalloy steel, containing by weight less than 0.1 percent lead
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel, of circular cross-section measuring 14 mm in diameter (excluding bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process)
Bars and rods of iron or nonalloy steel, hot-rolled, in irregularly wound coils, circular cross section measuring less than 14 millimeters, not tempered, not treated and not partly manufactured
Bars and rods of iron or nonalloy steel, hot-rolled, in irregularly wound coils, circular cross section less than 14 millimeters, not tempered or treated, of tire cord-quality steel measuring 5.0 to 6.0 millimeters in diameter with average partial decarburization no more than 70 micrometers
Bars and rods of iron or nonalloy steel, hot-rolled, in irregularly wound coils, circular cross section less than 14 millimeters, not tempered or treated, of cold heading quality (chq) steel meeting astm standard f2282
Bars and rods of iron or nonalloy steel, hot-rolled, in irregularly wound coils, circular cross section less than 14 millimeters, not tempered or treated, of welding quality measuring less than 10 millimeters in diameter with carbon less than 0.2 percent
Bars and rods, hot-rolled, in irregularly wound coils, of circular cross section less than 14 mm in diameter, not tempered, treated, or of specific qualities like tire cord, chq, or welding
Bars and rods of iron or nonalloy steel, hot-rolled, in irregularly wound coils, circular cross section measuring less than 14 millimeters, containing by weight 0.6 percent or more of carbon
Bars and rods of iron or nonalloy steel, hot-rolled, in irregularly wound coils, circular cross section measuring less than 14 millimeters, containing by weight less than 0.6 percent of carbon
Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel (excluding products of circular cross-section measuring 14 mm in diameter, bars and rods of free-cutting steel, and bars and rods with indentations, ribs, grooves or other deformations produced during the rolling process)
Bars and rods of iron or nonalloy steel, hot-rolled, in irregularly wound coils, of cross sections other than circular less than 14 millimeters
Bars and rods, hot-rolled, in irregularly wound coils, of circular cross section with a diameter of 14 mm or more but less than 19 mm
Bars and rods, hot-rolled, in irregularly wound coils, of circular cross section with a diameter of 19 mm or more
Bars and rods, hot-rolled, in irregularly wound coils, of a cross section other than circular
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, containing indentations, ribs, grooves or other deformations (concrete reinforcing)
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, of free-cutting steel
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, including those twisted after rolling, of free-cutting steel containing 0.1 percent or more lead
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, including those twisted after rolling, of free-cutting steel containing less than 0.1 percent lead
Bars and rods, of iron or non-alloy steel, not further worked than hot-rolled, hot-drawn or hot-extruded, of rectangular "other than square" cross-section (excluding containing indentations, ribs, grooves or other deformations produced during the rolling process, bars and rods twisted after rolling and free-cutting steel)
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, of rectangular (other than square) cross section
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, of rectangular cross section, containing less than 0.25 percent carbon, width less than 152 mm
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, of rectangular cross section, containing less than 0.25 percent carbon, width 152 mm or more
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, of rectangular cross section, containing 0.25 percent or more but less than 0.6 percent carbon
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, of rectangular cross section, containing 0.6 percent or more carbon
Bars and rods, of iron or non-alloy steel, only hot-rolled, only hot-drawn or only hot-extruded (excluding of rectangular [other than square] cross-section and those containing indentations, ribs, grooves or other deformations produced during the rolling process, and of non-alloy free-cutting steel)
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, of cross sections other than rectangular or forged
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, rounds containing less than 0.25 percent carbon, with a diameter less than 76 mm
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, rounds containing less than 0.25 percent carbon, with a diameter of 76 mm or more but not exceeding 152 mm
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, rounds containing less than 0.25 percent carbon, with a diameter exceeding 152 mm
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, rounds containing 0.25 percent or more but less than 0.6 percent carbon, diameter less than 76 mm
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, rounds containing 0.25 percent or more but less than 0.6 percent carbon, diameter 76 mm or more but not exceeding 152 mm
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, rounds containing 0.25 percent or more but less than 0.6 percent carbon, diameter exceeding 152 mm
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, rounds containing 0.6 percent or more carbon
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, of a cross section other than rounds or rectangular, containing less than 0.25 percent carbon
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, of a cross section other than rounds or rectangular, containing 0.25 percent or more but less than 0.6 percent carbon
Bars and rods of iron or nonalloy steel, not further worked than hot-rolled, forged, or extruded, of a cross section other than rounds or rectangular, containing 0.6 percent or more carbon
Bars and rods of iron or nonalloy steel, of free-cutting steel, not further worked than cold-formed or cold-finished
Bars and rods of free-cutting iron or nonalloy steel, not further worked than cold-formed or cold-finished, containing by weight 0.1 percent or more lead
Bars and rods of free-cutting iron or nonalloy steel, not further worked than cold-formed or cold-finished, containing by weight less than 0.1 percent lead
Bars and rods of iron or nonalloy steel, not further worked than cold-formed or cold-finished, other than free-cutting steel
Bars and rods of iron or nonalloy steel, not further worked than cold-formed or cold-finished, containing less than 0.25 percent carbon, diameter or cross section measuring less than 76 mm
Bars and rods of iron or nonalloy steel, not further worked than cold-formed or cold-finished, containing less than 0.25 percent carbon, diameter or cross section measuring 76 mm or more but not exceeding 228 mm
Bars and rods of iron or nonalloy steel, not further worked than cold-formed or cold-finished, containing less than 0.25 percent carbon, diameter or cross section exceeding 228 mm
Bars and rods of iron or nonalloy steel, not further worked than cold-formed or cold-finished, containing 0.25 percent or more but less than 0.6 percent carbon, diameter or cross section less than 76 mm
Bars and rods of iron or nonalloy steel, not further worked than cold-formed or cold-finished, containing 0.25 percent or more but less than 0.6 percent carbon, diameter or cross section 76 mm or more but not exceeding 228 mm
Bars and rods of iron or nonalloy steel, not further worked than cold-formed or cold-finished, containing 0.25 percent or more but less than 0.6 percent carbon, diameter or cross section exceeding 228 mm
Bars and rods of iron or nonalloy steel, not further worked than cold-formed or cold-finished, containing 0.6 percent or more carbon
Bars and rods of iron or nonalloy steel, plated or coated with metal, not cold-formed
Bars and rods of iron or nonalloy steel, not plated or coated and further worked than hot-rolled or cold-finished
Angles, shapes and sections of iron or nonalloy steel, u, i or h sections, not further worked than hot-rolled, of a height of less than 80 millimeters
U sections of iron or nonalloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height less than 80 mm
I or h sections of iron or nonalloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height less than 80 mm
Angles, shapes and sections of iron or nonalloy steel, l sections, not further worked than hot-rolled, of a height of less than 80 millimeters
Angles, shapes and sections of iron or nonalloy steel, t sections, not further worked than hot-rolled, of a height of less than 80 millimeters
Angles, shapes and sections of iron or nonalloy steel, u sections, not further worked than hot-rolled, of a height of 80 millimeters or more
Angles, shapes and sections of iron or nonalloy steel, i sections (standard beams), not further worked than hot-rolled, of a height of 80 millimeters or more
Angles, shapes and sections of iron or nonalloy steel, h sections, not further worked than hot-rolled, of a height of 80 millimeters or more
Angles, shapes and sections of iron or nonalloy steel, hot-rolled, h sections of 80 millimeters or more, weighing not more than 11.3 kilograms per 30.5 centimeters, with a web depth measuring 102 to 356 millimeters
H sections of iron or nonalloy steel, not further worked than hot-rolled, height 80 mm or more, weighing more than 11.3 kg but not more than 27.2 kg per 30.5 cm, with web depth measuring 203 mm to 457 mm
H sections of iron or nonalloy steel, not further worked than hot-rolled, height 80 mm or more, not of specific weight or web depth ranges
Angles, shapes and sections of iron or nonalloy steel, l or t sections, not further worked than hot-rolled, of a height of 80 millimeters or more
L sections of iron or nonalloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
T sections of iron or nonalloy steel, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more
Angles, shapes and sections of iron or nonalloy steel, other sections not further worked than hot-rolled
Angles, shapes and sections of iron or nonalloy steel, not further worked than cold-formed or cold-finished, obtained from flat-rolled products
Angles, shapes and sections of iron or nonalloy steel, not further worked than cold-formed or cold-finished, not from flat-rolled products
Angles, shapes and sections of iron or nonalloy steel, cold-formed or cold-finished from flat-rolled products and further worked
Angles, shapes and sections of iron or nonalloy steel, cold-formed or cold-finished from flat-rolled products, drilled, notched, punched or cambered
Angles, shapes and sections of iron or nonalloy steel, cold-formed or cold-finished from flat-rolled products, other than specifically advanced
Angles, shapes and sections of iron or nonalloy steel, further worked, not from flat-rolled products
Angles, shapes and sections of iron or nonalloy steel, hot-rolled, hot-drawn or extruded (not u, i, h, l or t), drilled, notched, punched or cambered
Angles, shapes and sections of iron or nonalloy steel, hot-rolled, hot-drawn or extruded (not u, i, h, l or t), other than specifically advanced
Wire of iron or nonalloy steel, not plated or coated, less than 0.25 percent carbon, flat wire, thickness not exceeding 0.25 millimeters
Wire of iron or nonalloy steel, not plated or coated, less than 0.25 percent carbon, flat wire, thickness exceeding 0.25 millimeters but not exceeding 1.25 millimeters
Wire of iron or nonalloy steel, not plated or coated, less than 0.25 percent carbon, flat wire, thickness exceeding 1.25 millimeters
Wire of iron or nonalloy steel, not plated or coated, less than 0.25 percent carbon, round wire, diameter less than 1.5 millimeters
Round wire of iron or nonalloy steel, not plated or coated, containing by weight less than 0.25 percent carbon, diameter less than 1.5 mm, heat treated, in coils weighing not more than 2 kilograms
Round wire of iron or nonalloy steel, not plated or coated, containing by weight less than 0.25 percent carbon, diameter less than 1.5 mm, heat treated, in coils weighing more than 2 kilograms
Round wire of iron or nonalloy steel, not plated or coated, containing by weight less than 0.25 percent carbon, diameter less than 1.5 mm, not heat treated
Wire of iron or nonalloy steel, not plated or coated, less than 0.25 percent carbon, round wire, diameter 1.5 millimeters or more
Round wire of iron or nonalloy steel, not plated or coated, containing by weight less than 0.25 percent carbon, diameter 1.5 mm or more, heat treated
Round wire of iron or nonalloy steel, not plated or coated, containing by weight less than 0.25 percent carbon, diameter 1.5 mm or more, not heat treated
Wire of iron or nonalloy steel, not plated or coated, less than 0.25 percent carbon, other than flat or round wire
Wire of iron or nonalloy steel, not plated or coated, 0.25 percent or more carbon, flat wire
Wire of iron or nonalloy steel, not plated or coated, 0.25 percent or more carbon, round wire
Round wire of iron or nonalloy steel, not plated or coated, containing by weight 0.25 percent or more but less than 0.6 percent carbon, heat treated
Round wire of iron or nonalloy steel, not plated or coated, containing by weight 0.25 percent or more but less than 0.6 percent carbon, not heat treated
Round wire of iron or nonalloy steel, not plated or coated, containing by weight 0.6 percent or more carbon, heat treated, with a diameter of less than 1.0 mm
Round wire of iron or nonalloy steel, not plated or coated, containing by weight 0.6 percent or more carbon, heat treated, with a diameter of 1.0 mm or more but less than 1.5 mm
Round wire of iron or nonalloy steel, not plated or coated, containing by weight 0.6 percent or more carbon, heat treated, with a diameter of 1.5 mm or more
Round wire of iron or nonalloy steel, not plated or coated, containing by weight 0.6 percent or more carbon, not heat treated, with a diameter of less than 1.0 mm
Round wire of iron or nonalloy steel, not plated or coated, containing by weight 0.6 percent or more carbon, not heat treated, with a diameter of 1.0 mm or more but less than 1.5 mm
Round wire of iron or nonalloy steel, not plated or coated, containing by weight 0.6 percent or more carbon, not heat treated, with a diameter of 1.5 mm or more
Wire of iron or nonalloy steel, not plated or coated, 0.25 percent or more carbon, other than flat or round wire
Wire of iron or nonalloy steel, plated or coated with zinc, round wire, diameter 1.5 millimeters or more, less than 0.25 percent carbon
Wire of iron or nonalloy steel, plated or coated with zinc, round wire, other than diameter 1.5 millimeters or more and less than 0.25 percent carbon
Round wire of iron or nonalloy steel, plated or coated with zinc, diameter less than 1.0 mm, containing less than 0.25 percent carbon
Round wire of iron or nonalloy steel, plated or coated with zinc, diameter less than 1.0 mm, containing 0.25 percent or more but less than 0.6 percent carbon
Round wire of iron or nonalloy steel, plated or coated with zinc, diameter less than 1.0 mm, containing 0.6 percent or more carbon
Round wire of iron or nonalloy steel, plated or coated with zinc, diameter 1.0 mm or more but less than 1.5 mm, containing less than 0.25 percent carbon
Round wire of iron or nonalloy steel, plated or coated with zinc, diameter 1.0 mm or more but less than 1.5 mm, containing 0.25 percent or more but less than 0.6 percent carbon
Round wire of iron or nonalloy steel, plated or coated with zinc, diameter 1.0 mm or more but less than 1.5 mm, containing 0.6 percent or more carbon
Round wire of iron or nonalloy steel, plated or coated with zinc, diameter 1.5 mm or more, containing 0.25 percent or more but less than 0.6 percent carbon
Round wire of iron or nonalloy steel, plated or coated with zinc, diameter 1.5 mm or more, containing 0.6 percent or more carbon
Wire of iron or nonalloy steel, plated or coated with zinc, other than flat or round, less than 0.25 percent carbon
Wire of iron or nonalloy steel, plated or coated with zinc, other than flat or round, 0.25 percent or more carbon
Flat wire of iron or nonalloy steel, plated or coated with other base metals, containing by weight 0.6 percent or more carbon
Flat wire of iron or nonalloy steel, plated or coated with other base metals, containing by weight less than 0.6 percent carbon
Wire of iron or nonalloy steel, plated or coated with other base metals, round wire, diameter 1.5 millimeters or more, less than 0.25 percent carbon
Wire of iron or nonalloy steel, plated or coated with other base metals, round wire, other than diameter 1.5 millimeters or more and less than 0.25 percent carbon
Round wire of iron or nonalloy steel, plated or coated with other base metals, suitable for electric arc welding, containing less than 0.20 percent carbon
Round wire of iron or nonalloy steel, plated or coated with other base metals, diameter less than 1.0 mm, containing less than 0.25 percent carbon
Round wire of iron or nonalloy steel, plated or coated with other base metals, diameter less than 1.0 mm, containing 0.25 percent or more but less than 0.6 percent carbon
Round wire of iron or nonalloy steel, plated or coated with other base metals, diameter less than 1.0 mm, containing 0.6 percent or more carbon
Round wire of iron or nonalloy steel, plated or coated with other base metals, diameter 1.0 mm or more but less than 1.5 mm, containing less than 0.25 percent carbon
Round wire of iron or nonalloy steel, plated or coated with other base metals, diameter 1.0 mm or more but less than 1.5 mm, containing 0.25 percent or more but less than 0.6 percent carbon
Round wire of iron or nonalloy steel, plated or coated with other base metals, diameter 1.0 mm or more but less than 1.5 mm, containing 0.6 percent or more carbon
Round wire of iron or nonalloy steel, plated or coated with other base metals, with a diameter of 1.5 mm or more
Wire of iron or nonalloy steel, plated or coated with other base metals, other than flat or round, less than 0.25 percent carbon
Wire of iron or nonalloy steel, plated or coated with other base metals, other than flat or round, 0.25 percent or more carbon
Wire of iron or nonalloy steel, not plated, coated or clad with metal or plastics, containing less than 0.25 percent carbon
Wire of iron or nonalloy steel, not plated, coated or clad with metal or plastics, containing 0.25 percent or more but less than 0.6 percent carbon
Wire of iron or nonalloy steel, not plated, coated or clad with metal or plastics, containing 0.6 percent or more carbon
Semifinished products of stainless steel, of rectangular (other than square) cross section
Semifinished products of stainless steel, of rectangular cross section, having a width less than four times the thickness, with a cross-sectional area of less than 232 square centimeters
Semifinished products of stainless steel, of rectangular cross section, having a width less than four times the thickness, with a cross-sectional area of 232 square centimeters or more
Semifinished products of stainless steel, of rectangular cross section, having a width at least four times the thickness
Semifinished products of stainless steel, of square cross section, having a cross-sectional area of less than 232 square centimeters
Semifinished products of stainless steel, of square cross section, having a cross-sectional area of 232 square centimeters or more
Semifinished products of stainless steel, of circular cross section, having a cross-sectional area of less than 232 square centimeters
Semifinished products of stainless steel, of circular cross section, having a cross-sectional area of 232 square centimeters or more
Semifinished products of stainless steel, not of rectangular, square, or circular cross section
Flat-rolled products of stainless steel, width 600 millimeters or more, hot-rolled, in coils, thickness exceeding 10 millimeters
Flat-rolled products of stainless steel, width 600 mm or more but not exceeding 1575 mm, not further worked than hot-rolled, in coils, thickness exceeding 10 mm
Flat-rolled products of stainless steel, width exceeding 1575 mm, not further worked than hot-rolled, in coils, thickness exceeding 10 mm
Flat-rolled products of stainless steel, width 600 millimeters or more, hot-rolled, in coils, thickness 4.75 millimeters or more but not exceeding 10 millimeters
Flat-rolled products of stainless steel, width 600 mm or more, in coils, not further worked than hot-rolled, thickness 4.75 mm or more but not exceeding 10 mm, not annealed or not pickled
Flat-rolled products of stainless steel, width 600 mm or more, in coils, not further worked than hot-rolled, thickness 4.75 mm or more but not exceeding 10 mm, of high-nickel alloy steel
Flat-rolled products of stainless steel, width 1370 mm or more but not exceeding 1575 mm, in coils, thickness exceeding 6.8 mm but not exceeding 10 mm
Flat-rolled products of stainless steel, width exceeding 1575 mm, in coils, thickness exceeding 6.8 mm but not exceeding 10 mm
Flat-rolled products of stainless steel, width 1370 mm or more but not exceeding 1575 mm, in coils, thickness 4.75 mm or more but not exceeding 6.8 mm
Flat-rolled products of stainless steel, width exceeding 1575 mm, in coils, thickness 4.75 mm or more but not exceeding 6.8 mm
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, thickness 4.75-10 mm, containing more than 0.5 percent nickel and 1.5-5 percent molybdenum
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, thickness 4.75-10 mm, containing more than 0.5 percent nickel (not of specific molybdenum content)
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, thickness 4.75-10 mm, not containing more than 0.5 percent nickel
Flat-rolled products of stainless steel, width 600 millimeters or more, hot-rolled, in coils, thickness 3 millimeters or more but less than 4.75 millimeters
Flat-rolled products of stainless steel, width 600 mm or more, in coils, not further worked than hot-rolled, thickness 3 mm or more but less than 4.75 mm, not annealed or not pickled
Flat-rolled products of stainless steel, width 1370 mm or more, in coils, not further worked than hot-rolled, thickness 3 mm or more but less than 4.75 mm, annealed and pickled
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, thickness 3-4.75 mm, containing 0.5-24 percent nickel and 1.5-5 percent molybdenum
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, thickness 3-4.75 mm, containing 0.5-24 percent nickel (not of specific molybdenum content)
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, thickness 3-4.75 mm, containing 0.5 percent or less nickel or 24 percent or more nickel
Flat-rolled products of stainless steel, width 600 millimeters or more, hot-rolled, in coils, thickness less than 3 millimeters
Flat-rolled products of stainless steel, width 1370 mm or more, not further worked than hot-rolled, in coils, of a thickness of less than 3 mm
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, thickness less than 3 mm, of high-nickel alloy steel
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, thickness less than 3 mm, not of high-nickel alloy steel
Flat-rolled products of stainless steel, width 600 millimeters or more, hot-rolled, not in coils, thickness exceeding 10 millimeters
Flat-rolled products of stainless steel, width 600 mm or more, not in coils, thickness exceeding 10 mm, of high-nickel alloy steel
Flat-rolled products of stainless steel, width 600 mm or more but not exceeding 1575 mm, not in coils, thickness exceeding 10 mm
Flat-rolled products of stainless steel, width exceeding 1575 mm but not exceeding 1880 mm, not in coils, thickness exceeding 10 mm
Flat-rolled products of stainless steel, width exceeding 1880 mm, not in coils, thickness exceeding 10 mm
Flat-rolled products of stainless steel, width 600 millimeters or more, hot-rolled, not in coils, thickness 4.75 millimeters or more but not exceeding 10 millimeters
Flat-rolled products of stainless steel, width 600 mm or more, not in coils, thickness 4.75 mm or more but not exceeding 10 mm, of high-nickel alloy steel
Flat-rolled products of stainless steel, width 600-1575 mm, not in coils, thickness 4.75-10 mm, containing 0.5 percent nickel and 1.5-5 percent molybdenum
Flat-rolled products of stainless steel, width 1575-1880 mm, not in coils, thickness 4.75-10 mm, containing 0.5 percent nickel and 1.5-5 percent molybdenum
Flat-rolled products of stainless steel, width exceeding 1880 mm, not in coils, thickness 4.75-10 mm, containing 0.5 percent nickel and 1.5-5 percent molybdenum
Flat-rolled products of stainless steel, width 600-1575 mm, not in coils, thickness 4.75-10 mm, containing more than 0.5 percent nickel (not specific molybdenum)
Flat-rolled products of stainless steel, width 1575-1880 mm, not in coils, thickness 4.75-10 mm, containing more than 0.5 percent nickel (not specific molybdenum)
Flat-rolled products of stainless steel, width exceeding 1880 mm, not in coils, thickness 4.75-10 mm, containing more than 0.5 percent nickel (not specific molybdenum)
Flat-rolled products of stainless steel, width 600-1575 mm, not in coils, thickness 4.75-10 mm, containing 0.5 percent or less nickel
Flat-rolled products of stainless steel, width 1575-1880 mm, not in coils, thickness 4.75-10 mm, containing 0.5 percent or less nickel
Flat-rolled products of stainless steel, width exceeding 1880 mm, not in coils, thickness 4.75-10 mm, containing 0.5 percent or less nickel
Flat-rolled products of stainless steel, width 600 millimeters or more, hot-rolled, not in coils, thickness 3 millimeters or more but less than 4.75 millimeters
Flat-rolled products of stainless steel, width 1370 mm or more, not in coils, not further worked than hot-rolled, thickness 3 mm or more but less than 4.75 mm
Flat-rolled products of stainless steel, width less than 1370 mm, not in coils, not further worked than hot-rolled, thickness 3 mm or more but less than 4.75 mm
Flat-rolled products of stainless steel, width 600 millimeters or more, hot-rolled, not in coils, thickness less than 3 millimeters
Flat-rolled products of stainless steel, width 1370 mm or more, not in coils, not further worked than hot-rolled, thickness less than 3 mm
Flat-rolled products of stainless steel, width less than 1370 mm, not in coils, not further worked than hot-rolled, thickness less than 3 mm
Flat-rolled products of stainless steel, width 600 millimeters or more, cold-rolled, thickness 4.75 millimeters or more
Flat-rolled products of stainless steel, width 600 mm or more, not further worked than cold-rolled, thickness 4.75 mm or more, in coils
Flat-rolled products of stainless steel, width 600 mm or more, not further worked than cold-rolled, thickness 4.75 mm or more, not in coils
Flat-rolled products of stainless steel, width 600 millimeters or more, cold-rolled, thickness 3 millimeters or more but less than 4.75 millimeters
Flat-rolled products of stainless steel, width 1370 mm or more, in coils, cold-rolled, thickness 3-4.75 mm, of high-nickel alloy steel
Flat-rolled products of stainless steel, width 1370 mm or more, in coils, cold-rolled, thickness 3-4.75 mm, containing more than 0.5 percent nickel
Flat-rolled products of stainless steel, width 1370 mm or more, in coils, cold-rolled, thickness 3-4.75 mm, containing 0.5 percent or less nickel
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, cold-rolled, thickness 3-4.75 mm, of high-nickel alloy steel
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, thickness 3-4.75 mm, containing 0.5 percent nickel and 1.5-5 percent molybdenum
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, thickness 3-4.75 mm, containing 0.5 percent nickel (not specific molybdenum)
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, thickness 3-4.75 mm, containing less than 15 percent chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width less than 1370 mm, in coils, thickness 3-4.75 mm, containing 15 percent or more chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width 1370 mm or more, not in coils, not further worked than cold-rolled, thickness 3 mm or more but less than 4.75 mm
Flat-rolled products of stainless steel, width less than 1370 mm, not in coils, not further worked than cold-rolled, thickness 3 mm or more but less than 4.75 mm
Flat-rolled products of stainless steel, width 600 millimeters or more, cold-rolled, thickness exceeding 1 millimeter but less than 3 millimeters
Flat-rolled products of stainless steel, width 1370 mm or more, in coils, cold-rolled, thickness 1-3 mm, of high-nickel alloy steel
Flat-rolled products of stainless steel, width 1370 mm or more, in coils, cold-rolled, thickness 1-3 mm, containing more than 0.5 percent nickel
Flat-rolled products of stainless steel, width 1370 mm or more, in coils, cold-rolled, thickness 1-3 mm, containing 0.5 percent or less nickel
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness exceeding 1 mm but less than 3 mm, in coils, width less than 1370 mm, of high-nickel alloy steel.,
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness exceeding 1 mm but less than 3 mm, in coils, width less than 1370 mm, containing more than 0.5 percent nickel and 1.5 percent or more but less than 5 percent molybdenum
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness exceeding 1 mm but less than 3 mm, in coils, width less than 1370 mm, containing more than 0.5 percent nickel, other than specific molybdenum content
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness exceeding 1 mm but less than 3 mm, in coils, width less than 1370 mm, containing less than 15 percent chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness exceeding 1 mm but less than 3 mm, in coils, width less than 1370 mm, containing 15 percent or more chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness exceeding 1 mm but less than 3 mm, not in coils, with a width of 1370 mm or more
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness exceeding 1 mm but less than 3 mm, not in coils, with a width less than 1370 mm, containing more than 0.5 percent but less than 24 percent nickel
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness exceeding 1 mm but less than 3 mm, not in coils, with a width less than 1370 mm, other than those containing 0.5 percent to 24 percent nickel
Flat-rolled products of stainless steel, width 600 millimeters or more, cold-rolled, thickness 0.5 millimeters or more but not exceeding 1 millimeter
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness of 0.5 mm or more but not exceeding 1 mm, in coils, of high-nickel alloy steel
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness of 0.5 mm or more but not exceeding 1 mm, in coils, containing more than 0.5 percent nickel and 1.5 percent or more but less than 5 percent molybdenum
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness of 0.5 mm or more but not exceeding 1 mm, in coils, containing more than 0.5 percent nickel, other than specific molybdenum content
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness of 0.5 mm or more but not exceeding 1 mm, in coils, containing less than 15 percent chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness of 0.5 mm or more but not exceeding 1 mm, in coils, containing 15 percent or more chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness of 0.5 mm or more but not exceeding 1 mm, not in coils
Flat-rolled products of stainless steel, width 600 millimeters or more, cold-rolled, thickness less than 0.5 millimeters
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness of less than 0.5 mm, in coils, containing more than 0.5 percent but less than 24 percent nickel, and more than 1.5 percent but less than 5 percent molybdenum
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness of less than 0.5 mm, in coils, containing more than 0.5 percent but less than 24 percent nickel, other than specific molybdenum content
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness of less than 0.5 mm, in coils, containing less than 15 percent chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness of less than 0.5 mm, in coils, containing 15 percent or more chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width 600 mm or more, cold-rolled, thickness of less than 0.5 mm, not in coils
Flat-rolled products of stainless steel, width 600 millimeters or more, further worked than hot-rolled or cold-rolled
Flat-rolled products of stainless steel, width 600 mm or more, further worked than hot-rolled or cold-rolled (other), of high-nickel alloy steel
Flat-rolled products of stainless steel, width 600 mm or more, further worked than hot-rolled or cold-rolled (other), containing more than 0.5 percent nickel and 1.5 percent or more but less than 5 percent molybdenum
Flat-rolled products of stainless steel, width 600 mm or more, further worked than hot-rolled or cold-rolled (other), containing more than 0.5 percent nickel, other than specific molybdenum content
Flat-rolled products of stainless steel, width 600 mm or more, further worked than hot-rolled or cold-rolled (other), containing less than 15 percent chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width 600 mm or more, further worked than hot-rolled or cold-rolled (other), containing 15 percent or more chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width less than 600 millimeters, hot-rolled, thickness 4.75 millimeters or more
Flat-rolled products of stainless steel, width 300 millimeters or more but less than 600 millimeters, hot-rolled, thickness less than 4.75 millimeters
Flat-rolled products of stainless steel, width less than 300 millimeters, hot-rolled, thickness less than 4.75 millimeters
Flat-rolled products of stainless steel, width 300 millimeters or more but less than 600 millimeters, cold-rolled
Flat-rolled products of stainless steel, width less than 600 mm, cold-rolled, width 300 mm or more, containing more than 0.5 percent but less than 24 percent nickel, and more than 1.5 percent but less than 5 percent molybdenum.,
Flat-rolled products of stainless steel, width less than 600 mm, cold-rolled, width 300 mm or more, containing more than 0.5 percent but less than 24 percent nickel, other than specific molybdenum content
Flat-rolled products of stainless steel, width less than 600 mm, cold-rolled, width 300 mm or more, containing less than 15 percent chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width less than 600 mm, cold-rolled, width 300 mm or more, containing 15 percent or more chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width less than 300 millimeters, cold-rolled, thickness exceeding 1.25 millimeters
Flat-rolled products of stainless steel, width less than 300 mm, cold-rolled, thickness exceeding 1.25 mm, of high-nickel alloy steel
Flat-rolled products of stainless steel, width less than 300 mm, cold-rolled, thickness exceeding 1.25 mm, containing more than 0.5 percent nickel and 1.5 percent or more but less than 5 percent molybdenum
Flat-rolled products of stainless steel, width less than 300 mm, cold-rolled, thickness exceeding 1.25 mm, containing more than 0.5 percent nickel, other than specific molybdenum content
Flat-rolled products of stainless steel, width less than 300 mm, cold-rolled, thickness exceeding 1.25 mm, containing less than 15 percent chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width less than 300 mm, cold-rolled, thickness exceeding 1.25 mm, containing 15 percent or more chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width less than 300 millimeters, cold-rolled, thickness exceeding 0.25 millimeters but not exceeding 1.25 millimeters
Flat-rolled products of stainless steel, width less than 300 mm, cold-rolled, thickness exceeding 0.25 mm but not exceeding 1.25 mm, of high-nickel alloy steel
Flat-rolled products of stainless steel, width less than 300 mm, cold-rolled, thickness exceeding 0.25 mm but not exceeding 1.25 mm, containing more than 0.5 percent nickel and 1.5 percent or more but less than 5 percent molybdenum
Flat-rolled products of stainless steel, width less than 300 mm, cold-rolled, thickness exceeding 0.25 mm but not exceeding 1.25 mm, containing more than 0.5 percent nickel, other than specific molybdenum content
Flat-rolled products of stainless steel, width less than 300 mm, cold-rolled, thickness exceeding 0.25 mm but not exceeding 1.25 mm, containing less than 15 percent chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width less than 300 mm, cold-rolled, thickness exceeding 0.25 mm but not exceeding 1.25 mm, containing 15 percent or more chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width less than 300 millimeters, cold-rolled, thickness not exceeding 0.25 millimeters, certified for use in the manufacture of razor blades
Flat-rolled products of stainless steel, width less than 300 millimeters, cold-rolled, thickness not exceeding 0.25 millimeters, other than razor blade steel
Flat-rolled products of stainless steel, width less than 300 mm, cold-rolled, thickness not exceeding 0.25 mm, other than razor blade steel, containing more than 0.5 percent but less than 24 percent nickel
Flat-rolled products of stainless steel, width less than 300 mm, cold-rolled, thickness not exceeding 0.25 mm, other than razor blade steel, containing 0.5 percent or less nickel
Flat-rolled products of stainless steel, width less than 600 millimeters, further worked than hot-rolled or cold-rolled
Flat-rolled products of stainless steel, width less than 600 mm, further worked (other), containing more than 0.5 percent but less than 24 percent nickel and more than 1.5 percent but less than 5 percent molybdenum
Flat-rolled products of stainless steel, width less than 600 mm, further worked (other), containing more than 0.5 percent but less than 24 percent nickel, other than specific molybdenum content
Flat-rolled products of stainless steel, width less than 600 mm, further worked (other), containing less than 15 percent chromium and 0.5 percent or less nickel
Flat-rolled products of stainless steel, width less than 600 mm, further worked (other), containing 15 percent or more chromium and 0.5 percent or less nickel
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, of high-nickel alloy steel
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, of circular cross section with a diameter less than 14 mm, containing less than 8 percent nickel
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, of circular cross section with a diameter less than 14 mm, containing 8 percent or more but less than 24 percent nickel
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, of circular cross section with a diameter of 14 mm or more but less than 19 mm
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, of circular cross section with a diameter of 19 mm or more
Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel, of a cross section other than circular
Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross section
Bars and rods of stainless steel, hot-rolled, hot-drawn or extruded, of circular cross-section, electroslag or vacuum arc remelted
Bars and rods of stainless steel, hot-rolled, hot-drawn or extruded, of circular cross-section, of high-nickel alloy steel
Bars and rods of stainless steel, hot-rolled, hot-drawn or extruded, circular cross-section, with a maximum cross-sectional dimension less than 152.4 mm, containing less than 8 percent nickel
Bars and rods of stainless steel, hot-rolled, hot-drawn or extruded, circular cross-section, with a maximum cross-sectional dimension less than 152.4 mm, containing 8 percent or more but less than 24 percent nickel
Bars and rods of stainless steel, hot-rolled, hot-drawn or extruded, circular cross-section, with a maximum cross-sectional dimension of 152.4 mm or more, containing less than 8 percent nickel
Bars and rods of stainless steel, hot-rolled, hot-drawn or extruded, circular cross-section, with a maximum cross-sectional dimension of 152.4 mm or more, containing 8 percent or more but less than 24 percent nickel.,
Bars and rods of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of cross sections other than circular
Bars and rods of stainless steel, hot-rolled, hot-drawn or extruded, not of circular cross-section, electroslag or vacuum arc remelted
Bars and rods of stainless steel, hot-rolled, hot-drawn or extruded, not of circular cross-section, of high-nickel alloy steel
Bars and rods of stainless steel, hot-rolled, hot-drawn or extruded, not of circular cross-section, containing less than 8 percent nickel
Bars and rods of stainless steel, hot-rolled, hot-drawn or extruded, not of circular cross-section, containing 8 percent or more but less than 24 percent nickel
Bars and rods of stainless steel, not further worked than cold-formed or cold-finished
Bars and rods of stainless steel, cold-formed or cold-finished, electroslag or vacuum arc remelted
Bars and rods of stainless steel, cold-formed or cold-finished, of high-nickel alloy steel
Bars and rods of stainless steel, cold-formed or cold-finished, circular cross-section, maximum dimension less than 18 mm, containing less than 8 percent nickel
Bars and rods of stainless steel, cold-formed or cold-finished, circular cross-section, maximum dimension less than 18 mm, containing 8 percent or more but less than 24 percent nickel
Bars and rods of stainless steel, cold-formed or cold-finished, circular cross-section, maximum dimension 18 mm or more but less than 152.4 mm, containing less than 8 percent nickel
Bars and rods of stainless steel, cold-formed or cold-finished, circular cross-section, maximum dimension 18 mm or more but less than 152.4 mm, containing 8 percent or more but less than 24 percent nickel
Bars and rods of stainless steel, cold-formed or cold-finished, circular cross-section, maximum dimension 152.4 mm or more, containing less than 8 percent nickel
Bars and rods of stainless steel, cold-formed or cold-finished, circular cross-section, maximum dimension 152.4 mm or more, containing 8 percent or more but less than 24 percent nickel
Bars and rods of stainless steel, cold-formed or cold-finished, not of circular cross-section, containing less than 8 percent nickel
Bars and rods of stainless steel, cold-formed or cold-finished, not of circular cross-section, containing 8 percent or more but less than 24 percent nickel
Bars and rods of stainless steel, further worked (other), electroslag or vacuum arc remelted
Bars and rods of stainless steel, further worked (other), of high-nickel alloy steel
Bars and rods of stainless steel, further worked (other), maximum dimension less than 152.4 mm, containing less than 8 percent nickel
Bars and rods of stainless steel, further worked (other), maximum dimension less than 152.4 mm, containing 8 percent or more but less than 24 percent nickel
Bars and rods of stainless steel, further worked (other), maximum dimension 152.4 mm or more, containing less than 8 percent nickel
Bars and rods of stainless steel, further worked (other), maximum dimension 152.4 mm or more, containing 8 percent or more but less than 24 percent nickel
Angles of stainless steel, hot-rolled, not drilled, punched or advanced, with a maximum cross-sectional dimension of 80 mm or more
Shapes and sections of stainless steel (not angles), hot-rolled, not drilled, punched or advanced, maximum dimension 80 mm or more
Angles of stainless steel, hot-rolled, not drilled, punched or advanced, with a maximum cross-sectional dimension less than 80 mm
Shapes and sections of stainless steel (not angles), hot-rolled, not drilled, punched or advanced, maximum dimension less than 80 mm
Wire of stainless steel, round, of spring round wire quality suitable for the manufacture of springs and meeting astm standard a313
Round wire of stainless steel, with a diameter of 0.25 mm or more but less than 0.76 mm
Round wire of stainless steel, with a diameter of 0.76 mm or more but less than 1.52 mm
Round wire of stainless steel, with a diameter of 1.52 mm or more but less than 5.1 mm
Ingots and primary forms of other alloy steel, other than high-nickel or tool steel
Semifinished products of other alloy steel, of tool steel, of rectangular cross section with a width less than four times the thickness
Semifinished products of other alloy steel, of tool steel, of rectangular cross section with a width at least four times the thickness
Semifinished products of other alloy steel, of tool steel, not of rectangular cross section
Semifinished products of other alloy steel (not high-nickel or tool steel), rectangular cross section, width less than four times thickness
Semifinished products of other alloy steel (not high-nickel or tool steel), rectangular cross section, width at least four times thickness
Semifinished products of other alloy steel (not high-nickel or tool steel), of circular cross section
Semifinished products of other alloy steel (not high-nickel or tool steel), not of rectangular or circular cross section
Flat-rolled products of silicon electrical steel, width 600 millimeters or more, grain-oriented
Flat-rolled products of silicon electrical steel, width 600 millimeters or more, not grain-oriented
Flat-rolled products of other alloy steel, width 600 millimeters or more, hot-rolled, in coils, thickness 4.75 millimeters or more, of tool steel
Flat-rolled products of other alloy steel, width 600 mm or more, hot-rolled, in coils, thickness 4.75 mm or more, of high-speed tool steel.,
Flat-rolled products of other alloy steel, width 600 mm or more, hot-rolled, in coils, thickness 4.75 mm or more, of tool steel other than high-speed
Flat-rolled products of other alloy steel, width 600 millimeters or more, hot-rolled, in coils, thickness 4.75 millimeters or more, not of tool steel
Flat-rolled products of other alloy steel (not tool steel), width 600 mm or more, hot-rolled, in coils, thickness 4.75 mm or more, of high-nickel alloy steel
Flat-rolled products of other alloy steel (not tool steel or high-nickel), width 600 mm or more, hot-rolled, in coils, thickness 4.75 mm or more
Flat-rolled products of other alloy steel, width 600 millimeters or more, hot-rolled, in coils, thickness less than 4.75 millimeters, of tool steel
Flat-rolled products of other alloy steel, width 600 mm or more, hot-rolled, in coils, thickness less than 4.75 mm, of high-speed tool steel
Flat-rolled products of other alloy steel, width 600 mm or more, hot-rolled, in coils, thickness less than 4.75 mm, of tool steel other than high-speed
Flat-rolled products of other alloy steel, width 600 millimeters or more, hot-rolled, in coils, thickness less than 4.75 millimeters, not of tool steel
Flat-rolled products of other alloy steel, width 600 millimeters or more, hot-rolled, not in coils, thickness 4.75 millimeters or more, of tool steel
Flat-rolled products of other alloy steel, width 600 mm or more, hot-rolled, not in coils, thickness 4.75 mm or more, of high-speed tool steel.,
Flat-rolled products of other alloy steel, width 600 mm or more, hot-rolled, not in coils, thickness 4.75 mm or more, of tool steel other than high-speed
Flat-rolled products of other alloy steel, width 600 millimeters or more, hot-rolled, not in coils, thickness 4.75 millimeters or more, not of tool steel
Flat-rolled products of other alloy steel (not tool steel), width 600 mm or more, hot-rolled, not in coils, thickness 4.75 mm or more, of high-nickel alloy steel
Flat-rolled products of other alloy steel (not tool steel or high-nickel), width 600 mm or more, hot-rolled, not in coils, thickness 4.75 mm or more
Flat-rolled products of other alloy steel, width 600 millimeters or more, hot-rolled, not in coils, thickness less than 4.75 millimeters, of tool steel
Flat-rolled products of other alloy steel, width 600 mm or more, hot-rolled, not in coils, thickness less than 4.75 mm, of high-speed tool steel.,
Flat-rolled products of other alloy steel, width 600 mm or more, hot-rolled, not in coils, thickness less than 4.75 mm, of ball-bearing tool steel
Flat-rolled products of other alloy steel, width 600 mm or more, hot-rolled, not in coils, thickness less than 4.75 mm, of tool steel other than high-speed or ball-bearing
Flat-rolled products of other alloy steel, width 600 millimeters or more, hot-rolled, not in coils, thickness less than 4.75 millimeters, not of tool steel
Flat-rolled products of other alloy steel, width 600 millimeters or more, cold-rolled, of tool steel
Flat-rolled products of other alloy steel, width 600 mm or more, cold-rolled, of high-speed tool steel
Flat-rolled products of other alloy steel, width 600 mm or more, cold-rolled, of ball-bearing tool steel
Flat-rolled products of other alloy steel, width 600 mm or more, cold-rolled, of tool steel other than high-speed or ball-bearing
Flat-rolled products of other alloy steel, width 600 millimeters or more, cold-rolled, not of tool steel, of a thickness of 4.75 millimeters or more
Flat-rolled products of other alloy steel, width 600 millimeters or more, cold-rolled, not of tool steel, thickness less than 4.75 millimeters, of heat-resisting steel
Flat-rolled products of other alloy steel, width 600 millimeters or more, cold-rolled, not of tool steel, thickness less than 4.75 millimeters, not of heat-resisting steel
Flat-rolled products of other alloy steel (not tool or heat-resisting steel), width 600 mm or more, cold-rolled, thickness less than 4.75 mm, of high-nickel alloy steel
Flat-rolled products of other alloy steel (not tool, heat-resisting or high-nickel), width 600 mm or more, cold-rolled, thickness less than 4.75 mm
Flat-rolled products of other alloy steel, width 600 millimeters or more, electrolytically plated or coated with zinc
Flat-rolled products of other alloy steel, width 600 millimeters or more, otherwise plated or coated with zinc
Flat-rolled products of other alloy steel, width 600 millimeters or more, otherwise plated or coated than with zinc
Flat-rolled products of other alloy steel, width 600 mm or more, further worked (other), of high-nickel alloy steel
Flat-rolled products of other alloy steel, width 600 mm or more, further worked (other), other than high-nickel alloy steel
Flat-rolled products of silicon electrical steel, width 300 millimeters or more but less than 600 millimeters, grain-oriented
Flat-rolled products of silicon electrical steel, width less than 300 millimeters, grain-oriented
Flat-rolled products of other alloy steel, width less than 300 mm, silicon electrical steel, grain-oriented, with a thickness not exceeding 0.25 mm
Flat-rolled products of other alloy steel, width less than 300 mm, silicon electrical steel, grain-oriented, with a thickness exceeding 0.25 mm
Flat-rolled products of silicon electrical steel, width 300 millimeters or more but less than 600 millimeters, not grain-oriented
Flat-rolled products of silicon electrical steel, width less than 300 millimeters, not grain-oriented
Flat-rolled products of other alloy steel, width less than 600 millimeters, of high-speed steel
Flat-rolled products of other alloy steel, width less than 600 millimeters, hot-rolled, of chipper knife steel
Flat-rolled products of other alloy steel, width 300 millimeters or more but less than 600 millimeters, hot-rolled, of tool steel other than chipper knife or high-speed steel
Flat-rolled products of other alloy steel, width 300 mm or more but less than 600 mm, hot-rolled, of ball-bearing tool steel.,
Flat-rolled products of other alloy steel, width 300 mm or more but less than 600 mm, hot-rolled, of tool steel other than ball-bearing
Flat-rolled products of other alloy steel, width less than 300 millimeters, hot-rolled, of tool steel other than chipper knife or high-speed steel
Flat-rolled products of other alloy steel, width less than 300 mm, hot-rolled, of ball-bearing tool steel
Flat-rolled products of other alloy steel, width less than 300 mm, hot-rolled, of tool steel other than ball-bearing
Flat-rolled products of other alloy steel, width less than 600 millimeters, hot-rolled, not of tool steel, thickness of 4.75 millimeters or more
Flat-rolled products of other alloy steel, width 300 millimeters or more but less than 600 millimeters, hot-rolled, not of tool steel, thickness less than 4.75 millimeters
Flat-rolled products of other alloy steel, width less than 300 millimeters, hot-rolled, not of tool steel, thickness less than 4.75 millimeters
Flat-rolled products of other alloy steel, width 300 millimeters or more but less than 600 millimeters, cold-rolled, of tool steel other than high-speed steel
Flat-rolled products of other alloy steel, width 300 mm or more but less than 600 mm, cold-rolled, of ball-bearing tool steel.,
Flat-rolled products of other alloy steel, width 300 mm or more but less than 600 mm, cold-rolled, of tool steel other than ball-bearing
Flat-rolled products of other alloy steel, width less than 300 millimeters, cold-rolled, of tool steel other than high-speed steel
Flat-rolled products of other alloy steel, width less than 300 mm, cold-rolled, of ball-bearing tool steel
Flat-rolled products of other alloy steel, width less than 300 mm, cold-rolled, of tool steel other than ball-bearing
Flat-rolled products of other alloy steel, width 300 millimeters or more but less than 600 millimeters, cold-rolled, not of tool steel
Flat-rolled products of other alloy steel, width less than 300 millimeters, cold-rolled, not of tool steel, thickness not exceeding 0.25 millimeters
Flat-rolled products of other alloy steel (not tool steel), width less than 300 mm, cold-rolled, thickness not exceeding 0.25 mm, of high-nickel alloy steel.,
Flat-rolled products of other alloy steel (not tool steel or high-nickel), width less than 300 mm, cold-rolled, thickness not exceeding 0.25 mm
Flat-rolled products of other alloy steel, width less than 300 millimeters, cold-rolled, not of tool steel, thickness exceeding 0.25 millimeters
Flat-rolled products of other alloy steel (not tool steel), width less than 300 mm, cold-rolled, thickness exceeding 0.25 mm, of high-nickel alloy steel
Flat-rolled products of other alloy steel (not tool steel or high-nickel), width less than 300 mm, cold-rolled, thickness exceeding 0.25 mm
Flat-rolled products of other alloy steel, width less than 600 millimeters, further worked than hot-rolled or cold-rolled
Flat-rolled products of other alloy steel, width less than 600 mm, further worked (other), electrolytically plated or coated with zinc
Flat-rolled products of other alloy steel, width less than 600 mm, further worked (other), otherwise plated or coated with zinc
Flat-rolled products of other alloy steel, width less than 600 mm, further worked (other), plated or coated with other materials
Bars and rods of other alloy steel, hot-rolled, in irregularly wound coils, of high-speed steel
Bars and rods of other alloy steel, hot-rolled, in irregularly wound coils, of silico-manganese steel
Bars and rods, hot-rolled, in irregularly wound coils, of silico-manganese steel, of welding quality wire rods described in statistical note 7
Bars and rods, hot-rolled, in irregularly wound coils, of silico-manganese steel, other than welding quality
Bars and rods of other alloy steel, hot-rolled, in irregularly wound coils, of tool steel other than high-speed steel, not tempered, not treated and not partly manufactured
Bars and rods, hot-rolled, in irregularly wound coils, of tool steel, not tempered or treated, of ball-bearing steel
Bars and rods, hot-rolled, in irregularly wound coils, of tool steel, not tempered or treated, other than ball-bearing
Bars and rods of other alloy steel, hot-rolled, in irregularly wound coils, of tool steel other than high-speed steel, tempered or treated or partly manufactured
Bars and rods, hot-rolled, in irregularly wound coils, of tool steel (tempered or treated), of ball-bearing steel
Bars and rods, hot-rolled, in irregularly wound coils, of tool steel (tempered or treated), other than ball-bearing
Bars and rods of other alloy steel, hot-rolled, in irregularly wound coils, not of high-speed, silico-manganese or tool steel
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel (not high-speed, silico-manganese or tool steel), of high-nickel alloy steel
Bars and rods of other alloy steel, hot-rolled, in irregularly wound coils, of cold heading quality (chq) steel as described in statistical note 6 and meeting astm standard f2282
Bars and rods, hot-rolled, in irregularly wound coils, of welding quality wire rods described in statistical note 7
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel, circular cross section, diameter less than 14 mm
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel, circular cross section, diameter of 14 mm or more but less than 19 mm.,
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel, circular cross section, diameter of 19 mm or more
Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel, not of circular cross section
Bars and rods of other alloy steel, of high-speed steel, cold-formed, with a maximum cross-sectional dimension less than 18 mm
Bars and rods of other alloy steel, of high-speed steel, cold-formed, with a maximum cross-sectional dimension of 18 mm or more
Bars and rods of other alloy steel, not further worked than hot-rolled, of tool steel specifically ball-bearing steel
Bars and rods of other alloy steel, not further worked than hot-rolled, of chipper knife steel
Bars and rods of other alloy steel, not further worked than hot-rolled, of tool steel other than ball-bearing or chipper knife steel
Bars and rods of other alloy steel, not further worked than hot-rolled, not of tool steel
Bars and rods of other alloy steel (not tool or silico-manganese), not further worked than hot-rolled, drawn or extruded, of high-nickel alloy steel.,
Bars and rods of other alloy steel (not tool or silico-manganese), not further worked than hot-rolled, drawn or extruded, for concrete reinforcement
Bars and rods of other alloy steel, hot-rolled, drawn or extruded, rounds or rectangular, with diameter or dimension less than 76 mm
Bars and rods of other alloy steel, hot-rolled, drawn or extruded, rounds or rectangular, dimension 76 mm or more but not exceeding 152 mm
Bars and rods of other alloy steel, hot-rolled, drawn or extruded, rounds or rectangular, dimension 152 mm or more but not exceeding 228 mm
Bars and rods of other alloy steel, hot-rolled, drawn or extruded, rounds or rectangular, with diameter or dimension exceeding 228 mm
Bars and rods of other alloy steel, not further worked than cold-formed or cold-finished, of tool steel
Bars and rods of stainless steel, cold-formed or cold-finished, of tool steel (not high-speed), of ball-bearing steel.,
Bars and rods of tool steel, cold-formed, maximum dimension less than 18 mm, of round or rectangular cross section with surfaces ground, milled or polished
Bars and rods of tool steel, cold-formed, maximum dimension less than 18 mm, other than ground, milled or polished
Bars and rods of tool steel, cold-formed, maximum dimension 18 mm or more, of round or rectangular cross section with surfaces ground, milled or polished.,
Bars and rods of tool steel, cold-formed, maximum dimension 18 mm or more, other than ground, milled or polished
Bars and rods of other alloy steel, not further worked than cold-formed or cold-finished, not of tool steel
Bars and rods of other alloy steel (not tool or silico-manganese), cold-formed or cold-finished, of high-nickel alloy steel
Bars and rods of other alloy steel, cold-formed or cold-finished, with a diameter or cross section measuring less than 76 mm
Bars and rods of other alloy steel, cold-formed or cold-finished, with a diameter or cross section measuring 76 mm or more but not exceeding 228 mm
Bars and rods of other alloy steel, cold-formed or cold-finished, with a diameter or cross section measuring exceeding 228 mm
Bars and rods of alloy steel other than stainless, cold-formed or cold-finished and further worked or hot-formed and further worked, n.e.s. (excluding products of high-speed steel or silico-manganese steel, semi-finished products, flat-rolled products and hot-rolled bars and rods in irregularly wound coils)
Other bars and rods of other alloy steel, of tool steel (not high-speed), of ball-bearing steel
Other bars and rods of other alloy steel, of tool steel (not high-speed), other than ball-bearing steel
Bars and rods of other alloy steel, further worked, not of tool steel and not cold-formed
Bars and rods of other alloy steel, further worked, not of tool steel and cold-formed
Angles, shapes and sections of other alloy steel, hot-rolled, not advanced, of u, i, h or t sections.,
Angles of other alloy steel, hot-rolled, not advanced, with a maximum cross-sectional dimension of 76 mm or more
Shapes and sections (not angles or specific sections) of other alloy steel, hot-rolled, not advanced, maximum dimension 76 mm or more
Angles of other alloy steel, hot-rolled, not advanced, with a maximum cross-sectional dimension less than 76 mm
Shapes and sections (not angles or specific sections) of other alloy steel, hot-rolled, not advanced, maximum dimension less than 76 mm
Round wire of silico-manganese steel, diameter 1.6 mm or less, containing less than 0.20 percent carbon, more than 0.9 percent manganese, and more than 0.6 percent silicon, suitable for electric arc welding, plated or coated with copper.,
Round wire of silico-manganese steel, diameter 1.6 mm or less, containing less than 0.20 percent carbon, more than 0.9 percent manganese, and more than 0.6 percent silicon, suitable for electric arc welding, not copper plated
Wire of other alloy steel, other than silico-manganese or high-speed steel, flat wire
Wire of other alloy steel, other than silico-manganese or high-speed steel, round wire
Round wire of other alloy steel, diameter 1.6 mm or less, containing less than 0.20 percent carbon and more than 0.3 percent nickel or more than 0.08 percent molybdenum, suitable for electric arc welding, plated or coated with copper.,
Round wire of other alloy steel, diameter 1.6 mm or less, containing less than 0.20 percent carbon and more than 0.3 percent nickel or more than 0.08 percent molybdenum, suitable for electric arc welding, not copper plated
Round wire of other alloy steel, other than specific welding quality, with a diameter of less than 1.0 mm
Round wire of other alloy steel, other than specific welding quality, with a diameter of 1.0 mm or more but less than 1.5 mm
Round wire of other alloy steel, other than specific welding quality, with a diameter of 1.5 mm or more
Wire of other alloy steel, other than silico-manganese, high-speed, flat or round wire